System Log Server - D-Link DES-3550 Manual

This page allows you to determine which port on a given switch will be allowed to forward packets to other ports on that
switch.
The user may set the following parameters:
Parameter
Port
Forward Portlist
Clicking the Apply button will enter the combination of transmitting port and allowed receiving ports into the Switch's
Traffic Segmentation Table.

System Log Server

The Switch can send Syslog messages to up to four designated servers using the System Log Server. In the Configuration
folder, click System Log Server, to view the screen shown below.
The parameters configured for adding and editing System Log Server settings are the same. See the table below for a
description.
The following parameters can be set:
Parameter Description
Index
DES-3550 Fast Ethernet Layer 2 Switch
Description
Check the corresponding boxes for the port(s) you wish to transmit packets.
Check the boxes to select which of the ports on the Switch will be able to forward
packets. These ports will be allowed to receive packets from the port specified above.
Figure 6- 48. System Log Servers window
Figure 6- 49. System Log Servers - Add
Syslog server settings index (1-4).
78