Figure 6- 55. Access Profile Configuration window (Packet Content Mask)
This screen will aid the user in configuring the Switch to mask packet headers beginning with the offset value specified.
The following fields are used to configure the Packet Content Masks:
Parameter
Description
Profile ID (1-255)
Type
DES-3550 Fast Ethernet Layer 2 Switch
Type in a unique identifier number for this profile set. This value can be set from 1 -
255.
Select profile based on Ethernet (MAC Address), IP address or packet content mask.
This will change the menu according to the requirements for the type of profile.
Select Ethernet to instruct the Switch to examine the layer 2 part of each
•
packet header.
Select IP to instruct the Switch to examine the IP address in each frame's
•
87