D-Link DES-3550 Manual page 62

The user may configure the following parameters to create a MSTI in the Switch.
Parameter Description
MSTI ID
Type
VID List (1-4094)
Priority (0-61440)
Click Apply to implement changes made.
To configure the settings for the CIST, click on its hyperlinked name in the Current MST Configuration Identification
window, which will reveal the following window to configure:
The user may configure the following parameters to configure the CIST on the Switch.
Parameter Description
MSTI ID
Type
DES-3550 Fast Ethernet Layer 2 Switch
Figure 6- 22. Instance ID Settings window- Add
Enter a number between 1 and 15 to set a new MSTI on the Switch.
Create is selected to create a new MSTI. No other choices are available for this field
when creating a new MSTI.
This field is used to specify the VID range from configured VLANs set on the Switch.
Supported VIDs on the Switch range from ID number 1 to 4094.
Select a value between 0 and 61440 to specify the priority for a specified MSTI for
forwarding packets. The lower the value, the higher the priority. This entry must be
divisible by 4094.
Figure 6- 23. Instance ID Settings window - CIST modify
The MSTI ID of the CIST is 0 and cannot be altered.
The type of configuration about to be processed. This window is used to set the
priority for the CIST only. All other parameters are permanently set and therefore
48