D-Link DES-3550 Manual page 63

VID List (1-4094)
Priority (0-61440)
Click Apply to implement changes made.
To configure the parameters for a previously set MSTI, click on its hyperlinked MSTI ID number, which will reveal the
following screen for configuration.
The user may configure the following parameters for a MSTI on the Switch.
Parameter Description
MSTI ID
Type
VID List (1-4094)
Priority (0-61440)
Click Apply to implement changes made.
DES-3550 Fast Ethernet Layer 2 Switch
unchangeable.
This field is used to specify the VID range from configured VLANs set on the Switch.
Supported VIDs on the Switch range from ID number 1 to 4094. This field is
inoperable when configuring the CIST.
Select a value between 0 and 61440 to specify the priority for a specified MSTI for
forwarding packets. The lower the value, the higher the priority. This entry must be
divisible by 4094.
Figure 6- 24. Instance ID Settings window - modify
Displays the MSTI ID previously set by the user.
This field allows the user to choose a desired method for altering the MSTI settings.
The user has 4 choices.
Add - Select this parameter to add VIDs to the MSTI ID, in conjunction with
•
the VID List parameter.
Remove - Select this parameter to remove VIDs from the MSTI ID, in con-
•
junction with the VID List parameter.
Delete - Select this parameter to delete this MSTI ID.
•
Set Priority Only - Select this parameter to set the priority for the MSTI ID.
•
This field is used in conjunction with the Priority field.
This field is used to specify the VID range from configured VLANs set on the Switch
that the user wishes to add to this MSTI ID. Supported VIDs on the Switch range from
ID number 1 to 4094. This parameter can only be utilized if the Type chosen is Add or
Remove.
Select a value between 0 and 61440 to specify the priority for a specified MSTI for
forwarding packets. The lower the value, the higher the priority. This entry must be
divisible by 4094 and can only be utilized if the Type chosen is Set Priority Only.
49