Year
Month
Day
Time in HH MM
Click Apply to implement your changes.
Time Zone and DST
The following are screens used to configure time zones and Daylight Savings time settings for SNTP. Open the
Configuration folder, then the SNTP folder and click on the Time Zone and DST link, revealing the following screen.
The following parameters can be set:
Parameter
Description
Time Zone and DST Settings
DES-3550 Fast Ethernet Layer 2 Switch
Enter the current year, if you want to update the system clock.
Enter the current month, if you would like to update the system clock.
Enter the current day, if you would like to update the system clock.
Enter the current time in hours and minutes, if you would like to update the system
clock.
Figure 6- 51. Time Zone and DST Settings Page
81