Printing A Testprint - Intermec PW50 User Manual

Printing a Testprint

PW50 Workboard Printer User's Guide
After you load media in the printer, you are ready to print a testprint.
If you cannot get the testprint information to print, see Chapter 3,
"Troubleshooting and Maintaining the PW50."
To print a testprint
1 Make sure the PW50 is in Standby mode and is loaded with media.
2 Press and hold the Standby and Feed buttons until the PW50
beeps.
3 Release the buttons.
4 The PW50 prints a testprint and starts Test Mode. For more
information, see
Chapter 1 — Using the PW50 Workboard Printer
"Understanding Test Mode" on page 20.
11