Installing Gcems Software - Dialogic IMG 1010 Quick Start Manual

Integrated media gateway

Hide thumbs Also See for IMG 1010:

Table of Contents

Installing GCEMS software.

To take advantage of all new features, it is recommended that the latest version of GCEMS

software be installed on the GCEMS Server. The most current software can be obtained from

the Dialogic Technical Support website.

1. Go to the Dialogic Support Technical Website at

2. Select „Downloads‟. You will require a logon username and password to access the

downloads site. (A support contract is needed to access this site.) Within this site will be

two software binary files with the following format. Download the latest version of these

files.

IMG_10.5.x.135.bin

IMGUserInterface_10.5.x.135.bin

Note: If you do not have a support contract with Dialogic, then the software supplied to you

on the Software CD can be used.

3. Refer to the topics under the following headings in the Online Documentation to install

the GCEMS software

IMG 1010-Installation and Setup Guide > IMG 1010-Software Installation and

Setup

http://www.dialogic.com/support

Welcome

Table of Contents

Do you have a question about the IMG 1010 and is the answer not in the manual?