Arming All Protection; Using The 2 Away Key - Honeywell VISTA-128BPTSIA User Manual

Arming All Protection

(With Entry Delay ON)

Using the 2 AWAY Key

Use this key when no one will be staying on the premises.
When armed in AWAY mode, the system will sound an alarm if a protected
door or window is opened, or if any movement is detected inside the premises.
You may leave through the entrance door during the exit delay period
without causing an alarm. You may also reenter through the entrance door,
but must disarm the system within the entry delay period or an alarm will
occur.
Close all perimeter windows and doors before arming (see
CHECKING FOR OPEN ZONES section)
1. Enter your security code and press
2.
YOU MAY EXIT NOW
– 36 –
ARMED **AWAY**
AWAY
2 .
The keypad will beep twice and will display the
armed message.
Note: The "YOU MAY EXIT NOW" portion of
the message disappears when exit delay
expires.