Requirements; Instructions - Intermec EasyCoder PD4 Service Manual

Appendix A—Firmware Upgrading

Requirements

Instructions

102
To upgrade the printer's fi rmware via a cable connection from a PC run-
ning MS Windows, you will need the following:
• The Intermec EasyCoder PD4 Confi g Tool. This is a free software
running under Microsoft Windows
various fi rmware version either directly to the printer or to a memory
cartridge. It also supports font downloading and memory partitioning.
The Confi g Tool supports seven languages and comes with a compre-
hensive on-line help in English.
• An upgrading fi le (.ufz). The Intermec EasyCoder PD4 Confi g Tool
comes with a collection of fi rmware upgrading fi les. New fi les can be
downloaded from the Intermec Web site (http://www.intermec.com)
and should be located in the subfolder "Firmware."
• A host computer running Microsoft Windows with a parallel, USB, or
RS-232 connection to the EasyCoder PD4. (Parallel or USB connec-
tions are recommended.)
Install the Intermec EasyCoder PD4 Confi g Tool in your PC.
1
Run the PD4Conf.exe program.
2
Set up the parameters for the fi rmware download. Use the on-line help
3
for instructions.
Start the Firmware download wizard and follow the instructions on the
4
screen.
1
/. Supported versions of MS Windows: Windows 95, Windows 98, Windows Me, Win-
dows 2000, and Windows XP.
1
. It makes it possible to download
Intermec EasyCoder PD4—Service Manual