Typical Operation - Lang GCCO-T Service Manual

GCCO-AP TYPICAL OPERATION SEQUENCE
ACTION
Turn power switch to ON.
Adjust proper temperature, between 140 & 450
degrees and allow to preheat up to 20 minutes.
Open oven doors and insert product, set timer up to
60 minutes.
Timer beeps continuously when done.
GCCO-T TYPICAL OPERATION SEQUENCE
ACTION
Turn power switch to ON.
Adjust proper temperature, between 140 & 450
degrees and allow to preheat up to 20 minutes.
Open oven doors and insert product, set timer up to
60 minutes.
Timer beeps continuously when done.
GCCO-SII TYPICAL OPERATION SEQUENCE
ACTION
Turn power switch to ON.
Press Temp button and use arrows to adjust to
proper Temp between 150 & 450.
Beeper will sound for 3 seconds when preheated.
Open doors and insert product.
Press Time Button and use arrows to adjust to
desired time. Press Start / Stop Button.
Beeper sounds continuously Press Start / Stop
Button.
RESULT
Control panel heat call light comes on.
Oven begins heating.
Timer begins counting down.
Product should now be done.
RESULT
Oven begins heating.
Timer begins counting down.
Product should now be done.
RESULT
Digital display reads "000"".
Oven begins heating and displays "pre".
Display will read preheated temperature.
Digital display will start countdown.
30

TYPICAL OPERATION