Lang GCCO-T Service Manual page 24

ACTION
Step 8. "SELECT PRODUCT NAME" is where you
spell the name using the
each letter. Then select "ENTER" to move
the cursor to the next space and select a new
letter.
NOTE: "APPETIZER A" is the name that must be
replaced with the new product name or blanks, when
the product name is shorter than "APPETIZER A".
EXAMPLE: "APPLE" replaces only APPET, IZER A
must be replace by blanks. A blank can
be found before "A" or after "9" when
scrolling.
ACTION
Step 9. "SELECT PRODUCT TEMPERATURE"
Press the or
select "ENTER" to move the cursor to the
next space and select a new number. The
screen will automatically advance after you
enter the last number.
EXAMPLE: (320) Press
select "ENTER" to advance the cursor.
Press two times for a "2", then select
"ENTER" to advance the cursor. Since
"0" is already displayed just select
"ENTER" to advance to the next screen.
ACTION
Step 10. "SELECT TIER COOK TIME". Time is
entered in hours:minutes:seconds. The
maximum is 12:59:59. Select "ENTER" to
advance cursor to the place you want to
enter a number.
EXAMPLE: (45 minutes:00 seconds) Select "ENTER"
twice to advance from hours to minutes,
then press
select "ENTER" to advance the cursor.
Then press
select "ENTER" to advance the cursor.
Since "0" is the next two numbers simply
select "ENTER" again twice to advance
the cursor.
or to select
to select a number. Then
three times for a "3", then
four times for a "4", then
five times for a "5", then
PROGRAMMING GCCO-PT CONT'D
SELECT PRODUCT NAME
APPETIZER A
USE
APPETIZER A
ACCEPT
ENTER
SELECT PRODUCT TEMPERATURE
USE
APPLE
TIER 1
ACCEPT
ENTER
SELECT TIER COOK TIME
USE
APPLE
TIER 1
TEMP: 320F
ACCEPT
ENTER
24
DISPLAY
KEYS TO SELECT
DISPLAY
100
KEYS TO SELECT
DISPLAY
00:45:00
KEYS TO SELECT