Lang GCCO-T Service Manual page 19

GCCO-C STATUS DISPLAY
The Status Display informs the operator of the oven's status.
It can be used as a countdown timer, shelf in use or internal oven temperature display during the
cooking cycle (see GCCO-C Programming Codes).
The Display informs the operator when the oven is ready to bake, or if the oven is above or below the
programmed temperature.
Below is a list of displays and their definitions:
ENTER
" "
PrEht
" "
rEAdY
" "
COOL
" "
Hot
" "
ShELF
" "
hELP
" "
Cont
" "
ErrOr
" "
PROGRAMMING GCCO-C CONT'D
The oven is energized and ready for an operator command.
Stands for "PREHEAT". A product has been selected and the oven is
heating to the programmed temperature.
A product has been selected and the oven has preheated to the
programmed temperature. The oven is ready to load a product.
The oven's internal temperature is below what is programmed.
The oven's internal temperature is above what is programmed.
A product selection has been made after the oven has preheated and the
computer is asking which shelf the product is placed on.
There is a fault in the control system, the computer will not operate until
service is performed.
Stands for "CONTINUOUS". The oven has been programmed without a
time being entered. The oven will operate continuously at the
programmed temperature.
An entry has been made during the programming, which the computer
does not understand.
19