Socket 7Ci User Manual page 14

O 1: U
PTION SING THE
To pair the CHS with your Apple device:
You only need to pair the CHS with your Apple device the first time you try to
connect.
By default, the CHS is in HID mode for Keyboard devices. If you changed the CHS to
a different mode, refer to the
1. Power on the CHS. Press and hold the small power button until the LED turns blue and
the CHS beeps twice (low-high).
The LED blinks blue once per second to show that the Bluetooth radio is on but not
connected.
2. Tap Settings
For iOS 5 or earlier, tap Settings | General | Bluetooth.
14
CHS HID M
IN
Command Barcodes
| Bluetooth. Turn on Bluetooth. A Bluetooth device search will begin.
ODE
to change it to the correct mode.