Port Access List; Figure 21- Port Management-Port Access List For Port 1; Figure 22- Port Management-Add Users To Access List; Figure 23- Port Management-Add Group To Access List - Network Technologies SERIMUX-S-x Installation And Operation Manual

NTI SERIMUX SERIES SSH CONSOLE SWITCH

Port Access List

From the Port Management menu, with Port x (any port) selected, press <7>-<Enter> to open the "Port Access List".

Figure 21- Port Management-port access list for Port 1

Each port can have individual user names and group names (pre-defined groups of users- see page 37) added to it that the
connected device will recognize as valid users. These names are not limited to the user names that can access the SERIMUX
menu. A user may connect to the SERIMUX using one name, and to a device with another. As long as the device recognizes the
name and password provided, access will be granted.
Note: Users and Groups defined in the Port Access List will only effect user access when the port is configured as a
"Host" port. When configured as a "User" port (page 15), all system users will have access to the SERIMUX through the
port.
Press <1> to be provided a prompt to add a user name.

Figure 22- Port Management-add users to access list

Options "add" and "remove" have been added to your choices. Press <a> to be prompted to enter a name to add to the user list,
or press <r> to be asked for the user number to remove from the list.
From the Port Access List menu (top of page), press <2>, then <a> (for add) to be shown the list of groups of users that have
been formed (page 37) and may be assigned access to that port.

Figure 23- Port Management-add group to access list

20