Setting Up The Answer Machine - Siemens Gigaset C470 IP Manual

Operating the base station answer machine
Deactivating call screening for the current recording
You can deactivate the
handset.
a
Briefly press the end call key.

Setting up the answer machine

The answer machine has already been preset at the factory. Make individual settings using
the handset.
Call acceptance/charge saving function for remote operation
You can set when you want the answer machine to accept a call.
The options are:
In Automatic mode, the following applies for call acceptance:
u
If there are no new messages, the answer machine accepts a call after 18 seconds.
u
If new messages are present, the answer machine accepts a call after 10 seconds.
When operating remotely you can tell after approx. 15 seconds that there are no new mes-
sages (otherwise the answer machine would already have accepted your call). There will
be no call charges if you hang up now.
¢
v Ð
Settings
r
Select
Press the display key.
§Save§
a
Press and hold (idle status).
Setting the recording time
You can set the maximum recording time of a message. You can choose between:
120 Sec, 180 Sec or Maximum.
¢
v Ð
Settings
r
Select the recording time.
Press the display key.
§Save§
Setting the recording quality
Set the quality you require for your recordings. The options are: Standard, High, Excellent.
If the quality is higher, the maximum recording time is reduced.
¢
v Ð
Settings
r
Select the recording quality.
Press the display key.
§Save§
Please note:
Your announcements are always recorded in best quality.
70
VoIPon www.voipon.co.uk
Call Screening
0 sec., after 10 sec., 18 sec.
¢ ¢
Voice Mail Ring Delay
0 sec. / 10 sec. / 18 sec.
¢ ¢
Voice Mail Message Length
¢ ¢
Voice Mail Record Quality
sales@voipon.co.uk
function for the current call during recording via the
or 30 sec. and the cost-saving setting Automatic.
/ 30 sec. / Automatic.
Tel: +44 (0)1245 808195
Setting up the answer machine
Fax: +44 (0)1245 808299
60 Sec,