Changing the dialling mode
Operating the base station on the PABX
The following settings are only necessary when your PABX requires them; see the PABX
user guide. The settings only concern fixed line network connections.
You cannot send or receive SMS messages on PABXs that do not support Calling Line Iden-
tification.
Changing the dialling mode
You can set the dialling mode.
¢
v
Ð
Settings
Tone / Pulse
Select and press
a
Press and hold (idle status).
Setting recall
You can set the recall option.
¢
v
Ð
Settings
q
Select recall and press
The current setting is indicated by
a
Press and hold (idle status).
Setting pauses
Changing pause after line seizure
You can set the length of the pause inserted between pressing the talk key c and sending
the phone number.
v 5 5 O
L
~
Enter a number for the length of the pause (1 = 1 sec.; 2 = 3 sec.; 3 = 7 sec.)
and press
a
Press and hold (idle status).
Changing the pause after the recall key
You can change the length of the pause if your PABX requires this (refer to the user guide
for your PABX).
v 5 5 O
~
Enter a number for the length of the pause (1 = 1 sec.; 2 = 2 sec.; 3 = 3 sec.;
4 = 6 sec.) and press
a
Press and hold (idle status).
VoIPon
www.voipon.co.uk
¢
¢
Telephony
Fixed Line
‰
(
= on).
§OK§
¢
¢
Telephony
Fixed Line
.
§OK§
‰
.
.
§OK§
.
§OK§
sales@voipon.co.uk
Operating the base station on the PABX
¢
Dialling Mode
¢
Recall
Tel: +44 (0)1245 808195
111
Fax: +44 (0)1245 808299