Functions During A Call - Siemens Gigaset C470 IP Manual

Network services – VoIP

Functions during a call

Precondition: Your phone will permit two parallel VoIP connections (s.
on page 128).
Consultation call
During a call:
Press the display key.
§Ext.Call§
~ c
Enter the number or copy from the directory and press and release/press and
hold c.
The number must be dialled via VoIP.
.
Please note:
After a few seconds, the number selected for a consultation call is saved in the last number redial list.
If the participant answers, you have the following options:
u
Toggling:
¤
Use q to toggle between the participants.
¤
End call with active participant:
u
Conference call:
¤
Call both participants: press the display key
¤
End the conference call (toggling): press display key
¤
End call with both participants: press the end call key a.
u
Forwarding (provider dependent):
Precondition: You are toggling calls and you phoned the currently active participant
yourself.
¤
To connect the two external participants:
If call forwarding was successful, a message will appear to this effect. The handset will
then switch to idle.
Accepting a waiting call
Precondition: Call waiting is activated (page 41).
Press the display key.
§Accept§
You have the option of toggling or holding a conference call.
Please note:
– If the first call was an internal call, the internal connection is ended.
– An internal call waiting is shown on the display. You can neither accept the internal call nor reject
it.
42
VoIPon www.voipon.co.uk
§Options§
sales@voipon.co.uk
End Active Call.
.
§Conf.§
§EndConf§
Call Transfer
§Options§
Tel: +44 (0)1245 808195
Functions during a call
Allow 1 VoIP call only
.
Fax: +44 (0)1245 808299