Siemens Gigaset C470 IP Manual page 95

Using several handsets
Level:
Set noise level sensitivity
¤
Press the display key
The function is now activated. With
Please note:
An external number will be dialled via the default connection (VoIP or fixed line network) if you do
not enter a line suffix (page 27) and have not defined any dialling plans for the number (page 135).
Changing the set destination number
¢ ¢
v í
Room Monitor
s
Scroll to the
X
or
§Delete
Delete existing number.
¤
Enter number as described in "Activating the room monitor and entering the number to
be called" (page 93).
Deactivating the room monitor remotely
Preconditions: The room monitor call is sent to an external destination number. The tele-
phone called supports touch tone dialling.
¤
Accept the call from the room monitor and press keys 9 ;.
Your base station sends a confirmation tone and ends the connection.
Please note:
Remote deactivation via VoIP connections is possible if DTMF signals are transmitted either as SIP info
messages, as audible signals via the voice channel (inband or audio) or as special RTP data packets
pursuant to RFC2833 (provider-dependent).
Room monitor function deactivated on handset. There will be no further room monitor
calls. The other room monitor settings (e.g. no ringer tone) on the handset will remain acti-
vated until you press the display key
To reactivate the room function with the same phone number:
¤
Turn on the activation again and save with
94
VoIPon www.voipon.co.uk
(Low or High).
to save the entry.
§Save§
, you can switch directly to the settings.
§Options§
Call to: line.
on the handset.
§OFF§
sales@voipon.co.uk
Using a handset as a room monitor
(page 93).
§Save§
Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299