Siemens Gigaset C470 IP Manual page 141

Web configurator
You should assign a
ID. The Priority determines which of the devices receives the message.
Example: You are online using one of your phone's handsets and your PC both at the same
time. You have assigned your phone
(Resource name "PC") Priority 10. In this case, any message addressed to your Jabber ID will
be sent to your phone.
¤
Open the following Web page:
¤
In the
Messenger Account
server or another provider's messenger server (Other).
The access data for
ber ID, Authentication password
the Gigaset.net Jabber server through your PC.
¤
Enter the user ID (max. 50 characters) and password (max. 20 characters) that you used
to register with the messenger server in the
If you have selected
your Gigaset.net account.
¤
In the Jabber server
with which you are registered for instant messaging.
Max. 74 alphanumeric characters.
If you have selected
name of the Gigaset.net server.
¤
Enter the number of the communication port on the Jabber server in the
field. The default port is 5222.
port
If you have selected
¤
Enter a resource name (max. 20 characters) in the
The default is: phone.
¤
Enter the priority for your phone in the
(highest priority) and 127 (lowest priority) for the priority.
The default is: 5
¤
Click Set.
Setting up Gigaset.net Jabber account
Your phone is already registered with the Gigaset.net Jabber server. An account has been
assigned to your phone.
In order to chat with other Gigaset.net subscribers via this account, you must transfer the
required Gigaset.net subscribers to a contact list (buddy list) on your PC. You can use any
conventional Jabber client for this (e.g. PSI, Miranda; see e.g. http://www.swissjabber.ch).
In order to use the Gigaset.net Jabber account, proceed as follows:
¤
Start the Web configurator, open the
select the
Messenger Account Gigaset.net
and
Authentication
ent on the PC.
¤
Start your Jabber client on the PC.
140
VoIPon www.voipon.co.uk
Priority as each message will only be sent to one device for each Jabber
(Resource
Settings
field, select whether you wish to use the
is already stored in the base station. It is displayed in
Gigaset.net
and Jabber
Messenger Account =
field, enter the IP address or the DNS name of the messenger server
Messenger Account =
Messenger Account = Gigaset.net,
password. You will need these to create a buddy list via the Jabber cli-
sales@voipon.co.uk
name "phone")
¢ ¢
Messaging Messenger.
server. With this data you can also register with
and
Jabber ID
Gigaset.net, the fields are preconfigured with
Gigaset.net, the field is preconfigured with the
the port number is preconfigured.
Resource
Priority field. Select a number between -128
¢
Settings Messaging
field. Your account data is displayed in
Tel: +44 (0)1245 808195
Saving messenger access data
5 and your PC
Priority
Jabber
Gigaset.net
Authentication password
Jabber server
field.
¢
Messenger Web page and
Fax: +44 (0)1245 808299
Jab-
fields.
Jabber ID