Siemens Gigaset C470 IP Manual page 12

Setting up the handset for use
¤
Insert the batteries the right way round (see figure).
The polarity is indicated in/on the battery compartment.
The handset switches on automatically. You will hear a confirmation tone.
Closing the battery cover
¤
First insert the battery cover at the top.
¤
Then press the cover until it clicks into place.
Opening the battery cover
¤
Place your fingertip in the cavity on the casing and pull the battery cover upwards.
Connecting the charging cradle
The charging cradle is designed to be operated in enclosed, dry areas at temperatures
ranging from +5 °C to +45 °C.
Instructions on how to connect the charging cradle and mount it on the wall (if required)
can be found at the end of this user guide.
¤
To charge the batteries, leave the handset in the charging cradle.
Please note:
– Only place the handset in the charging cradle that is intended for it.
– If the handset has turned itself off because the batteries are flat and is then placed in the charging
cradle, it will turn itself on automatically.
For questions and problems see page 146.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195
First steps
11
Fax: +44 (0)1245 808299