Activating/deactivating call screening
During recording of a message you can screen a call via the handset loudspeaker.
Precondition: The number called is assigned to the handset as a receive number
(page 144).
Permanently activating/deactivating call screening
¢
¢
v
Ð
Settings
Call Screening
Select and press
a
Press and hold (idle status).
Deactivating call screening for the current recording
You can deactivate the
handset.
a
Briefly press the end call key.
Setting up the answer machine
The answer machine has already been preset at the factory. Make individual settings using
the handset.
Call acceptance/charge saving function for remote operation
You can set when you want the answer machine to accept a call.
The options are:
0
sec., after
In
mode, the following applies for call acceptance:
Automatic
u
If there are no new messages, the answer machine accepts a call after 18 seconds.
u
If new messages are present, the answer machine accepts a call after 10 seconds.
When operating remotely you can tell after approx. 15 seconds that there are no new mes-
sages (otherwise the answer machine would already have accepted your call). There will
be no call charges if you hang up now.
¢
¢
v
Ð
Settings
r
Select
0 sec.
Press the display key.
§Save§
a
Press and hold (idle status).
¢
Voice Mail
Local AM
‰
(
= on)
§OK§
function for the current call during recording via the
Call Screening
10
sec.,
18 sec.
¢
Voice Mail
Local AM
/
10 sec.
/
18 sec.
/
Operating the base station answer machine
Activating/deactivating call screening
or
30 sec.
and the cost-saving setting Automatic.
¢
Ring Delay
30 sec.
/ Automatic.
77