Table of Contents
Advertisement
4.2.2
Set the timer
1. Repeat steps 1 to 3 in section 4.2.1.
+
-
2. Press
or
to select
1
3. Press
and then set the number of hours (00 to 12)
+
-
using the
or
keys.
1
4. Press
and then set the number of minutes (00 to 59)
+
-
using the
or
keys.
1
5. Press
to confirm.
NOTE
When the timer period is reached, the unit will emit an alert
beep and 00:00 on the screen. You can press any button
to stop the beeps. If the timer mode was set to ONCE, the
timer will be cancelled, but if set to REPEATED, it will reset and
start another timer period.
4.3
Set the brightness
1
1. Press
to access the main menu.
+
-
2. Press
or
to select BRIGHTNESS.
1
3. Press
to enter the sub-menu to set the brightness level.
+
-
4. Press
or
to select from
screen brightness changes as the options are selected.
1
5. Press
to confirm.
NOTE
A lower brightness level will reduce the power consumption.
14
SET
TIMER.
LEVEL 1
to
LEVEL
5. The
4.4
Sound alert
When the sound alert is set ON, and the parent unit speaker
volume is off, it will cause the parent unit to beep and flash
"Sound alert" on the display, whenever the sound at the
baby unit goes above a preset threshold.
1
1. Press
to access the main menu.
+
-
2. Press
or
to select
1
3. Press
to enter the sub-menu.
+
-
4. Press
or
to select
1
5. Press
to confirm.
4.5
Alert tones
You can set the parent unit to give a warning when the
battery is low and/or if the radio link to the baby unit is lost.
When activated, an alert screen will be displayed on the
parent unit with an alert tone emitted simultaneously.
1
1. Press
to access the main menu.
+
-
2. Press
or
to select
1
+
-
3. Press
and
or
1
+
-
4. Press
and
or
tone.
1
5. Press
to confirm.
SOUND
ALERT.
ON
or OFF.
ALERT
TONES.
to select
LOW BATTERY
or
NO
to select
ON
or
OFF
for the alert
Parent unit settings
LINK.
Advertisement
Table of Contents
