Table of Contents
Advertisement
• Battery pack in parent unit may be running low. Connect
the parent unit to the mains power with the supplied
power adaptor for recharging.
Cannot view the video image of baby from the
parent unit
• Video feed maybe turned off. Activate the video feed by
6
pressing
.
• The parent unit and the baby unit may be out of range
with each other. Reduce the distance between the units,
but not closer than 5 feet.
• Battery pack in parent unit may be drained. Connect the
parent unit to the mains power with the supplied power
adaptor for recharging.
Cannot hear sound or baby cry from the parent unit
• The volume level in the parent unit may be set too low,
increase the volume level of the parent unit. Refer to
section 3.3 for volume level settings.
• The parent unit and the baby unit may be out of range
with each other. Reduce the distance between the units,
but not closer than 5 feet.
TROUBLESHOOTING
The baby monitor system produces a high-pitched
noise
• The parent unit and the baby unit are too close to each
other. Make sure the parent unit and baby unit are at
least 5 feet away from each other.
• The speaker volume of the parent unit maybe set too
high. Decrease the volume of the parent unit.
Battery pack in the parent unit is running low
quickly
• The brightness level of the parent unit screen may be
set too high, which consumes more power. Reduce the
brightness level of the screen - see section 4.3.
• The volume level of the parent unit may be set too high
which consumes power. Decrease the volume level of
the parent unit. Refer to section 3.3 for volume level
settings.
Talk back feature is not working
• Make sure the baby unit is powered on, and the link
between the parent unit and baby unit is normal.
• Check that the volume is loud enough at the baby unit,
refer to section 3.4.
17
Advertisement
Table of Contents
