Adjust The Volume Level Of Audio Playback; Set The Timer; Set The Temperature Unit; Use The Camera - Motorola PIP1510 CONNECT User Manual

4. Select a personal recording or stop listening, then press OK to start or stop
playback.
Note
The personal recording is only available when you have recorded your personal
sound through the Motorola Nursery App.
3.3.4

Adjust the volume level of audio playback

Press MENU on the parent unit. The status bar pops up.
1.
2. Scroll the navigation button to
3. Scroll the navigation button to
4. Scroll the navigation button to select a desired volume level. There are 3
levels to choose from. Then press OK to confirm.
3.4

Set the timer

You can set timers on the parent unit to remind you or caregivers of the time
to feed the baby, change the baby's diaper or put the baby to bed.
Press MENU on the parent unit. The status bar pops up.
1.
2. Scroll the navigation button to
3. Scroll the navigation button to select 2h, 4h, 6h or OFF. If the next feeding
time is 2 hours later, select 2h. When activated,
screen.
4. The parent unit will beep when the time limit is reached. Press OK to stop
the timer.
3.5

Set the temperature unit

The baby (camera) unit has a temperature sensor that can detect the baby
room temperature.
Press MENU on the parent unit.
1.
2. Scroll the navigation button to
3. Scroll the navigation button to select
3.6

Use the camera

3.6.1

Pair or add a camera with the parent unit

See 'Registering the baby (camera) unit to the parent unit (Pairing)' on
page 13.
3.6.2

Cycle cameras

Press MENU on the parent unit. The status bar pops up.
1.
2. Scroll the navigation button to select
3. Scroll the navigation button to select
4. If you have registered different cameras, the screen will display images
from different registered cameras approximately every 12 seconds.
Using the video baby monitor
.
, then press OK.
.
.
°C or °F.
.
, then press OK.
will be displayed on the
15