Table of Contents
Advertisement
3.6
Set the timer
You can set timers on the parent unit to remind you or caregivers of the time
to feed the baby, change the baby's diaper or put the baby to bed.
1.
Tap
on the menu bar of the parent unit.
2. Tap
on
to turn on the timer, then tap
press represents an interval of 15 minutes, up to an interval of 6 hours.
3. If the next feeding time is 4 hours later, press
until 04:00 is displayed.
4. Tap
set
to confirm the time,
5. The parent unit will beep when the time limit is reached. Press any key to
stop the timer.
3.7
Two-way talk
You can use the Talk Back feature to comfort and reassure your baby. Whilst
using Talk Back you will not be able to hear your baby until you release the
button.
on the menu bar of the parent unit, Touch to talk will be displayed
1.
Tap
on the screen.
2. Tap
to talk to your baby through the parent unit's speaker. Tap
the screen when you finish speaking.
3. Tap
on the menu bar to turn off the talk back feature.
3.8
Use the camera
3.8.1
Pair or add a camera with the parent unit
See 'Registering the baby (camera) unit to the parent unit (Pairing)' on
page 13.
3.8.2
View a camera
1.
Tap
on the menu bar of the parent unit.
2. Tap
and
3. Tap
/
from that camera. The selected camera will appear in dark grey on the
screen.
3.8.3
Remove a camera
1.
Tap
on the menu bar of the parent unit.
2. Tap
and
3. Tap
/
registration.
Note
You cannot remove the camera if it is the only registered camera in the parent
unit.
16
will appear on the status bar.
/
/
/
/
/
to select a desired camera to view the picture
/
/
/
/
/
to select a desired camera to remove it from
or
to select the time. Each key
or
will pop up.
will pop up.
Using the video baby monitor
to adjust the timer
on
Advertisement
Table of Contents
