Table of Contents
Advertisement
7.8
Set the timer
You can set timers on the parent unit to remind you or caregivers of the time
to feed the baby, change the baby's diaper or put the baby to bed.
1.
Tap
on the menu bar of the parent unit.
2. Tap
on
to turn on the timer, then tap
press represents an interval of 15 minutes, up to an interval of 6 hours.
3. If the next feeding time is 4 hours later, press
until 04:00 is displayed.
save
4. Tap
to confirm the time,
5. The parent unit will beep when the time limit is reached. Press any key to
stop the timer.
7.9
Two-way talk
You can use the Talk Back feature to comfort and reassure your baby. Whilst
using Talk Back you will not be able to hear your baby.
1.
Tap
on the menu bar of the parent unit to talk to your baby through
the parent unit's microphone.
2. Tap
again when you finish speaking.
7.10
Use the camera
7.10.1
Pair or add a camera with the parent unit
See 'Pair the baby (camera) unit to the parent unit' in Section 4.
7.10.2
Remove a camera
1.
Tap
on the menu bar of the parent unit.
2. Tap
and
3. Tap
/
/
registration.
Note
You cannot remove the camera if it is the only registered camera in the parent
unit.
7.10.3
View a camera
1.
Tap
on the menu bar of the parent unit.
2. Tap
and
3. Tap
/
/
from that camera. The selected camera will appear in black on the screen.
7.10.4
Use the patrol mode
This function is available if you have more than one baby (camera) unit.
1.
Tap
on the menu bar of the parent unit.
2. Tap
and the screen will display images from different registered cameras
every 12 seconds.
will appear on the status bar.
/
/
/
/
to select a desired camera to remove it from
/
/
/
/
to select a desired camera to view the picture
or
to select the time. Each key
or
to adjust the timer
will pop up.
will pop up.
Advertisement
Table of Contents
