Belt Clip On Parent Unit - Motorola MBP20 User Manual

Motorola
Hide thumbs Also See for MBP20:
Table of Contents

Advertisement

3. Insert the plug of the battery pack into the socket inside
the battery compartment, and fit the battery pack into
the compartment.
4. Replace the battery compartment cover, and reinstall
the belt clip / stand (refer to section 2.3).
5. Insert the DC plug of the power adapter with the larger
DC plug into the DC socket in the side of the parent unit.
6. Connect the other end of the power adapter to a
suitable mains power outlet.
7. The Charging Indicator comes on.
NOTE
Only use the provided power adapter.
10
2.3

Belt clip on parent unit

1. The belt clip/stand attaches to the back of the parent
unit and clips into the locking slots on each side.
2. The unit comes with the accessory fitted in belt clip
mode.
3. You can convert it into stand mode by pulling the clip
out slightly and then rotating it by half a turn, as shown.
GETTING STARTED

Advertisement

Table of Contents
loading

Table of Contents