Additional Hdmi Settings Screen - Motorola DCX3300 User Manual

Configuring A/V and Closed Captioning

Additional HDMI Settings Screen

To configure the DCX3300 settings on the Additional HDMI Settings menu screen:
1. With an HDMI connection in place, power off the DCX3300 and then immediately
press the MENU key on the remote control.
2. This will display the main User Settings menu.
3. Move the cursor next to the "Additional HDMI Settings" option and press the ►
key.
The Additional HDMI Settings menu options are:
Setting
HDMI/DVI
Mode
Color Space
DCX3300 High-Definition Dual Tuner / External DVR Set-top • User Guide
365-095-14427 x.2
An example of the Additional HDMI Settings menu.
Description
The HDMI/DVI Mode setting allows you to optimize the HDMI output to work
with both DVI-equipped televisions and HDMI equipped televisions. By
default, this option is set to HDMI. The options are used as follows:
•
HDMI – The DCX3300 is optimized to work with an HDMI television or
home theater receiver.
•
DVI – The DCX3300 is optimized to work with a DVI television or display
device (connected via an HDMI-to-DVI adapter).
The Color Space setting allows you to adjust the color space used by the
DCX3300 to generate the video signals on the HDMI output. By default, this
option is set to YCC 4:4:4. The options are used as follows:
•
YCC 4:4:4 – The DCX3300 will generate video signals within the YCC color
space.
•
RGB – The DCX3300 will generate video signals within the RGB color
space.
Note: Adjusting these settings could result in a loss of video. Only a
professional installer or someone with a good working knowledge of the color
spaces supported by the TV should change this setting.
B
31