Pitney Bowes Internet Fax Kit User Manual page 98

6
Enter e-mail address using a one-touch key, a speed-dial number or a mail group number.
Note: You cannot use the numeric keypad to enter e-mail address.
To add each number, press BROADCAST between each one, then enter the number.
You can specify up to 300 numbers for a remote unit.
Note: If you want to review the numbers you entered, press [Review].
If you want to erase any number, move the cursor on it and press [Erase].
When you finish to review, press [Return] to return to the previous display.
7
Press ENTER. The LCD will show:
8
Select "TTI Type" and press ENTER.
The machine asks for the type of TTI you want to appear on the faxes that are relayed to other callers.
• Sender — Relay the document with sender unit's TTI (don't send your TTI).
• Both — Relay the document with both the sender unit's TTI and your TTI.
• Yours — Relay the document with your TTI instead of the sender unit's.
9
Using the cursor key, select the type of TTI you want, and then press ENTER.
10
Use the cursor key to select "ON" or "OFF" you want. Then press ENTER.
ON: The machine prints the received document and relays it to the e-mail address.
OFF: The machine does not print the received document, but only relays it to the e-mail address.
11
Select "Exit" then press ENTER.
12
Press STOP to finish and return to standby.
5.13