Pitney Bowes Internet Fax Kit User Manual page 82

If you want to erase any e-mail address or fax number, move the cursor on it and press [Erase].
When you are finished, press [Return] to return to the previous display.
11
Press START. The machine starts to scan the document into memory. Then starts sending the e-mail and
fax to each address.
If two or more accounts are registered, the LCD asks you to enter the account name to use for sending.
To use the default account, press [Default] or ENTER without entering any characters.
To use a different account, press [List], and use the cursor key to select the account name from the list,
then press ENTER.
If the account is configured with a password, enter the password, then press ENTER.
Note: The account password should be entered with matching the case of letters.
For 3500
1
Place the document(s) face up, top edge first. Adjust the document guides — by sliding either of them to
the left or right — to fit the page(s) you'll be sending.
2
Press Internet Fax to choose e-mail address input mode.
MailAddress;Lower
_
3
Press .
BROADCAST
4
Select "To", "cc" or "bcc" by pressing the soft key which assigned "To/Cc/Bcc" (see page 4.2).
5
Enter the e-mail address. Use either a one-touch number, a speed-dial number, a mail group number or
numeric keypad.
abcde@domain
To :S001_
Note: If you enter characters by mistake, press CANCEL to erase them.
6
To add more e-mail addresses, repeat steps 3 to 5.
7
Press Internet Fax to choose fax number input mode. (The Internet Fax light goes out.)
abcde@domain
To :S001_
8
Press .
BROADCAST
4.17