Pitney Bowes Internet Fax Kit User Manual page 68

To use the default account, press [Default] or ENTER without entering any characters.
To use a different account, press [List], and use the cursor key to select the account name from the list,
then press ENTER.
If the account is configured with a password, enter the password, then press ENTER.
Note: The account password should be entered with matching the case of letters.
For 3500
1
Place the document(s) face up, top edge first. Adjust the document guides — by sliding either of them to
the left or right — to fit the page(s) you'll be sending.
2
Press Internet Fax to choose Internet FAX communication.
MailAddress;Lower
_
3
Select "To", "cc" or "bcc" by pressing the soft key which assigned "To/Cc/Bcc" (see above).
4
Enter the full e-mail address by using the numeric keypad.
MailAddress;Lower
abcd@domain_
5
Press START. The machine starts to scan the document into memory. Then starts sending the e-mail
message.
If two or more accounts are registered, the LCD asks you to enter the account name to use for sending.
AccountName;Upper
_
To use the default account, press ENTER without entering any characters.
To use a different account, press
name, then press ENTER twice.
If the account is configured with a password, enter the password, then press ENTER.
Password
_
Note: The account password should be entered with matching the case of letters.
to display the account name list, then use
;Upper
or to select the account
4.3