Configuration: General: Dst Settings - Swann NVR16-7200 User Manual

English

Configuration: General: DST Settings

Enable DST (check-box): Enable this setting if you'd like the
NVR to adjust the time when daylight savings time begins.
From / To: Here you can define when daylight savings applies
to your location. There are many different standards for DST
which can vary dramatically even in the same time zone, so
you'll need to tell the NVR when it applies to you.
DST Bias: This refers to the difference in minutes, between
Coordinated Universal Time (UTC) and the local time. Select
the time that DST has increased by in your time zone.
NOTE: Some NTP servers are NOT fully compatible with DST
(Daylight Savings Time). This may cause your system to double-
count adding one or removing one more hour than they should,
or cancel each other out. You may need to intentionally change
your time zone to compensate, or simply not use NTP and DST
simultaneously.
35