Camera Management: Ip Camera - Swann NVR16-7200 User Manual

English
The Camera Management: IP Camera screen is where you
can configure how and where the NVR will look for cameras,
and what networking protocols and settings you want to use
for them.
We are unable to provide direct support for cameras other
than those that came with the NVR.
Note: Depending on the type of camera(s) connected and their
method of connection, the NVR is able to self-populate many of
the fields on this screen. If you find a value you can't edit, this is
because the NVR automatically detects and sets the appropriate
value.
Protocol: Provides you with the option of changing the port
number for the Main Stream and SubStream video feed. We
recommend leaving the default settings as the NVR has been
configured to work with port 554 for RTSP (Real-Time Stream-
ing Protocol).
Camera No: Displays the number of the currently selected
camera (see the list of cameras displayed below).
Edit: Provides you with the option of changing the network
settings of the camera. We recommend leaving the default
settings as the NVR will automatically detect each camera that
is connected.
Delete: As the NVR is designed to work with the network cam-
eras provided, the delete function has been disabled.
Live View: Press the play button to display a live view of the
camera that you have selected. A small preview screen will ap-
pear displaying a live view from the camera.

Camera Management: IP Camera

Camera Name: Displays the name of the currently selected
camera.
IP Camera Address: The address of the camera currently se-
lected.
Manage Port: The port number the selected camera is using
to communicate over the network to which it is attached.
Protocol: The way that the selected camera communicates
with the NVR. The cameras included with your NVR will be set
to SWANN.
Device Model: Displays the model number of the currently
selected camera.
Status: Displays the status of the currently selected camera.
Serial No.: Displays the serial number of the currently select-
ed camera.
Firmware: Displays the firmware version of the currently se-
lected camera.
Note: You will see a window on the top left-hand side of the
screen with a Quick Add and Search buttons. As the NVR is
designed to work with the supplied cameras only, you cannot
add additional network cameras; therefore this feature has
been disabled.
25