Hdd: General; Hdd: Advanced - Swann NVR16-7200 User Manual

English
The HDD: General menu allows you to initialize the hard
drive(s) in the NVR. Don't initialize a drive that already has data
on it, as the initialization process will erase any information
on the drive. You also have the option of adding a Network-
attached storage device (NAS) that you can record to.
Add: Create a folder on your NAS device, then input the IP
address of your NAS device and the folder name that you
created earlier.
The HDD: Advanced menu allows you to configure a quota
on the HDD for each camera that is connected to the NVR.
Each camera can be allocated a certain amount of space that
is available on the HDD. If you have multiple HDDs installed,
you can also instruct the NVR on which HDD each camera can
record to.
20

HDD: General

Init: Initializes the HDD so that it's ready to accept data.
To find out which NAS devices are compatible with our NVR,
please visit our website

HDD: Advanced

To do this, for Mode select Group and click the Apply button,
you will then be asked to restart the NVR for this selection to
take effect. When the NVR has rebooted, go to HDD: General.
You will see an Edit option; click this to select a different
property and group for that particular hard drive installed.
Click the Advanced menu, for Record on HDD Group; you
can select a different group and which cameras are assigned
to that group.
www.swann.com
Technical Support Telephone Helpdesk.
or contact Swann