The Setup Wizard - Swann NVR16-7200 User Manual

English

The Setup Wizard

The wizard contains six quick setup screens which
will allow you to choose how you want the NVR to
behave. Please be patient as it can take up to 60
seconds for the wizard to appear after the NVR is
turned on.
You'll be asked to:
• Select a language.
• Set a password for the ADMIN account.
• Configure the time, date and time zone for your
location.
• Configure the NVR so it can operate on your
network and access (and be accessed from) the
Internet.
• Initialize and format your hard drive(s), if required.
System Language: Choose the language you'd like
the menu system to be displayed in.
When this check-box is left ticked, the setup wizard
will run again the next time the NVR is rebooted or
powered on. If you don't want the wizard to start next
time the NVR is turned on, uncheck this box.
To access the wizard once it's been disabled, open
Main Menu > Configuration > General and select
Enable Wizard.
Setup Wizard: Language
Setup Wizard: Wizard
11