Advertisement
Quick Links
NVR Quick Start Guide
READ ME
FIRST!
Welcome! Lets get started.
• Getting to know your NVR
• What does this mean?
• Installing the Wi-Fi Antennas
• Connect your Cameras
• Connect your NVR to your Home Network
• Connect your Mouse
• Connect your NVR to your HDTV
• Connect your Power Adapter
QHGUAEYE111215E | © Swann 2015
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Swann SWNVW-GUAEYE
Summary of Contents for Swann SWNVW-GUAEYE
- Page 1 • What does this mean? • Installing the Wi-Fi Antennas • Connect your Cameras • Connect your NVR to your Home Network • Connect your Mouse • Connect your NVR to your HDTV • Connect your Power Adapter QHGUAEYE111215E | © Swann 2015...
- Page 2 Getting to know your NVR Congratulations on the purchase of your Swann NVR. This quick start guide will assist you on getting your NVR up and running as soon as possible. We recommend that you connect everything and give it a try before you do a permanent installation, to make sure nothing was damaged during shipping.
-
Page 3: What Does This Mean
What does this mean? 1 & 7) Wi-Fi Input - The supplied Wi-Fi antenna connects FCC Note: This equipment has been tested and found to comply with the here. The Wi-Fi antenna communicates with the supplied limits for a Class B digital device, pursuant to part 15 of the FCC Rules. cameras as well as your Wi-Fi network. - Page 4 Step One - Installing the Wi-Fi Antennas 1 2 V Located at the rear of your NVR are two Wi-Fi antenna Use a clockwise motion to connect. Make sure the connections. There is also a single Wi-Fi connection at the antenna is connected firmly but not excessively.
- Page 5 Step Two - Connect your Cameras Power Adapter Power Power Input Output Power Extension Cable Reset Power Input Connect the Power Input on the camera to the Power Connect each Power Adapter to a wall socket. Press the Output on the Power Extension Cable. Repeat this step for wall socket’s switch to the on position to supply power.
- Page 6 Step Three - Connect your NVR to your Home Network Connect the supplied Ethernet cable (1) to the LAN connection on the NVR then connect the other end to a spare port on your router or wireless access point. Don’t proceed to the next step until this is done. AUDIO DC 12V IN Please note...
- Page 7 Step Four - Connect your Mouse Connect the supplied mouse (1) to one of the available USB ports. You can connect a USB storage device such as a flash drive (not included) to the other port, to back up your video recordings and to perform a firmware upgrade. AUDIO DC 12V IN Please note...
- Page 8 Step Five - Connect your NVR to your HDTV Connect the supplied HDMI cable to the HDMI output on the NVR then connect the other end to a spare HDMI input (1) on your HDTV. Make sure the video input on the HDTV matches the physical connection used to connect the NVR. HDMI IN 2 HDMI IN 1 AUDIO...
- Page 9 Step Six - Connect your Power Adapter Connect the supplied power adapter’s power connection (1) to the power input on your NVR first (this will minimise sparking) then connect the power adapter to a spare wall socket (illustration may differ from what is supplied). AUDIO DC 12V IN All the connections have now been completed.
Need help?
Do you have a question about the SWNVW-GUAEYE and is the answer not in the manual?
Questions and answers