Configuration; Configuration: Live View - Swann NVR16-7200 User Manual

English
The Configuration: RS-232 menu will allow you to change
settings for the RS-232 port. It is mainly used for low level
testing and is not required for day to day use.
Video Output Interface: The default output is VGA/HDMI.
Live Video Mode: 4 x 4 is the default mode for live video
mode. This will display up to 16 video channels on-screen at a
single time. Selecting 1 x 1 will display the first video channel
full-screen. Other views available are 2 x 2, 3 x 3, 1 + 5 and 1
+ 7.
Dwell Time: The time in seconds to dwell on a video channel
when enabling Start Auto-switch in Live View. This only
works when the Live Video Mode is set 1 x 1.
Configuration: RS-232

Configuration: Live View

Enable Audio Output: As the cameras supplied with the NVR
do not support audio capture, this option is not required.
Event Output: The default output is VGA/HDMI.
Full Screen Monitoring Dwell Time: The time in seconds to
show an alarm event screen.
45