Table of Contents
Advertisement
Before using the DVR, you must first set up the setup the system according to your needs and
location; otherwise the DVR will run in the default settings which may be unsuitable for you.
1. Using the Setup Menu
When in setup mode, pressing the up or down button, will move the cursor will through the
various settings, continuous pushing will make the cursor move among the options one by one.
The selected option will be highlighted in yellow.
While choosing digital fields, e.g. year, month, day, hour, minute, second etc, push the left or
right button, to move to the different digits of one field. Continuous pushing will make it move
amoung digits one by one, and it can recur. Press the "Add" or "Dec" button to change the value
that the cursor is highlighting, then push the "ENTER" button to enter sub menu and push the
"Menu" button to return to previous menu.
2. Accessing the Menu
If the DVR is in the recording mode, you can not access the menu unless you stop the recording
first. Press the "Stop" button and enter the password to stop all functions, then press the "Menu"
button.
The password can be a combination of 4 digits of "0-9". The default is "0000". To enter the menu,
you must input the correct password by pushing the digit buttons. If the password you have
inputted is incorrect, the system will automatically return to the main screen. If you want to cancel
the input of the password, you can push the Menu button to return to the main screen again. While
inputting the password, in order to avoid being revealed to bystanders, the password you input is
displayed on the screen as "*" signs.
To change the password, please refer to the "password change" section.
8/16 Channel Digital Video Recorder
S
y
s
t
e
m
S
S
y
s
t
e
m
S
e
t
u
p
e
t
u
p
1
Advertisement
Table of Contents
