Load Onboard Lan1 Option Rom / Load Onboard Lan2 Option Rom; Boots Graphic Adapter Priority; Super Io Configuration; Serial Port 1 - Supermicro Supero X9SPU-F User Manual

Chapter 4: AMI BIOS

Load Onboard LAN1 Option ROM / Load Onboard LAN2 Option ROM

This feature is to enable or disable the onboard option ROMs. The default for LAN
1 is Enabled. The default for LAN 2 is Disabled.

Boots Graphic Adapter Priority

This option allows the user to specify which graphics controller to be used as the
primary boot device. The options are Onboard and Offboard.

Super IO Configuration



Serial Port 1

Select Enabled to enable the onboard serial port. The options are Enabled and
Disabled.

Serial Port 1 Settings

This option specifies the base I/O port address and the Interrupt Request address
of the serial port. The options for Serial Port 1 are listed below.
Auto,
IO=3F8h; IRQ=4;
IO=3F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=3E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
Serial Port 2
Select Enabled to enable the onboard serial port. The options are Enabled and
Disabled.

Serial Port 2 Settings

This option specifies the base I/O port address and the Interrupt Request address
of the serial port. The options for Serial Port 2 are listed below.
Auto,
IO=2F8h; IRQ=3;
IO=3F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=3E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
4-11