Table of Contents
Advertisement
4-8
Security Settings
•
If the Administrator password is defined ONLY - this controls access to the
BIOS setup ONLY.
•
If the User's password is defined ONLY - this password will need to be entered
during each system startup or boot, and will also have Administrator rights in
the setup.
•
Passwords must be at least 3 and up to 20 characters long.
Password Check
Use this feature to determine when a password entry is required. Select Setup to
require the password only when entering setup. Select Always to require the pass-
word when entering setup and on each boot. The options are Setup and Always.
Administrator Password
Press Enter to create a new, or change an existing Administrator password.
Secure Boot Control
Use this item to secure boot flow control. Secure boot is possible only if the system
runs in User Mode. The options are Enabled and Disabled.
4-23
Chapter 4: AMI BIOS
Advertisement
Table of Contents
