Table of Contents
Advertisement
X9SPU-F Motherboard User's Manual
pendency on other timestamp calculation devices, such as an x86 RDTSC Instruc-
tion embedded in the CPU. The High Performance Event Timer is used to replace
the 8254 Programmable Interval Timer. The options are Enabled and Disabled.
Suspend Mode
This setting allows you to configure the ACPI (Advanced Configuration and Power
Interface) sleep state for your system when it is in the Suspend mode. The options
are Suspend Disabled, and S1 (POS).
WHEA Support
This feature Enables the Windows Hardware Error Architecture (WHEA) support for
the Windows 2008 operating system (and later versions). The options are Enabled
and Disabled.
PCH-FW Configuration
This item displays the Management Engine subsystem information and parameters.
MDES BIOS Status Code
This item enables the MDES BIOS status code. The options are Disabled and
Enabled.
Firmware Update Configuration
Me FW Image Re-Flash
Use this item to enable the ME image re-flash function. The options are Disabled
and Enabled.
Intel ICC
Use this feature to configure Integrated Clock Control (ICC) options.
Use Watchdog Timer for ICC
This feature enables watchdog timer operation for ICC. If set to Enabled, watchdog
timer will be started after ICC-related changes. This watchdog timer will detect
platform instability caused by wrong clock settings. The options are Disabled and
Enabled.
Turn off unused PCI/PCIe clocks
When set to Disabled, all unused PCI/PCIe clocks will remain turned on. When
set to Enabled, clocks for empty PCI/PCIe slots will be turned off to save power.
Changes will take effect at next system boot. The options are Enabled and Disabled.
4-16
Advertisement
Table of Contents
