Connecting To The Print Server - NETGEAR PS101 Reference Manual

NetGear Print Server Manual

3-2 Connecting to the Print Server

In order to configure the print server over the browser interface, your PC workstation must have a web
browser program installed such as Microsoft Internet Explorer or Netscape Navigator. Free browser
programs are available for Windows, Macintosh, or Unix/Linux.
1. Start your Web Browser
2. In the Address box, enter HTTP:// followed by the name or the IP Address of the print server. e.g.
http://192.168.0.21
Alternatively, the IP address of the print server can be found under "Device Information" in the "Control"
menu of the NETGEAR Print Server Administration Program.
If the IP address information is correct, you can usually use the name of the PS101
Mini Print Server for the print server web configuration. The name of the print server
is on the base of the device in the form of PSnnnnnn, where nnnnnn varies on each
PS101.
3. You will then be prompted for the password. If no password has been set, just press ENTER.
4. Use the menu selections listed on the left of the screen to move about.
Note: Remember to save modifications made on any screen by clicking the Save button before
changing to a different screen.
7