Buttons - NETGEAR PS101 Reference Manual

NetGear Print Server Manual
default, the NetGear Administration Program only browses the network with NetBEUI to minimize
unnecessary packets on the network.
If you still do not see all the print servers, the print server that you are trying to configure might have
the default NetBEUI protocol disabled. If the protocol is disabled, click on the Protocol button to
enable browsing with IPX/SPX and TCP/IP. Make sure that the IPX/SPX and TCP/IP protocols are
also enabled and bound to the network adapter card in your Windows 95, Windows 98, Windows NT,
Windows XP, or Windows 2000 system.

Buttons

Advanced Button
Click on the Advanced button for detailed full configuration of the selected Print Server. See the later
5-2 Advanced Print Server Configuration
section for more information about the
Advanced option.
Quick Button
Click on the Quick button to open the Quick Setup Screen to perform a quick configuration of the print
server in a Microsoft network running the NetBEUI protocol.
Clicking the Quick Setup button will reveal a screen like the following.
Quick Setup Screen
Enter the required Device Name, and click "OK". The Device Name is how users on the network will
see this Print Server on the network.
Protocol Button
This screen allows you to disable protocols that are not used on your network. An example screen is
shown below.
38