Chapter 3 Web Management For Print Server; Configuring Print Server For Tcp/Ip - NETGEAR PS101 Reference Manual

NetGear Print Server Manual
Chapter 3
The web browser interface provides an easy way to configure the print server in a TCP/IP network.
You can configure your NETGEAR PS101 Mini Print Server using any web browser such as
Microsoft Internet Explorer or Netscape Navigator.
This chapter contains information about configuring your NETGEAR PS101 Mini Print Server using
the print server's browser interface. Please refer to the next following chapters for setting up your
printing system.

3-1 Configuring Print Server for TCP/IP

Using a web browser to configure
a NETGEAR Print Server requires
both the print server and the host
workstation that the web browser
runs on to be configured for
TCP/IP.
NETGEAR PS101 Print Server is
set with the factory setting for
DHCP environment, which means
if you have a DHCP server (most
recent broad band routers have
provided this feature), PS101 will
get its own IP address settings for
TCP/IP.
To get the IP information for the
print server, you need to install the
Administrative Tools while
installing the print server software.
Please refer to Chapter 4 for
software installation. Run the
NETGEAR Print Server
Administration. See Figure 3-1.
Select the PS101 and click on Advance button to open the panel. Refer to Chapter 5, section 5-3 for the
menu Control option and select Device Information. There you will find the IP address for the PS101
Print Server.
You must have Microsoft Windows system to use with PS101 Mini Print Server for the
NEATGEAR Print Server Administrative Tools.
Web Management for Print Server
Figure 3-1 Print Server Administration program
6