Intermec CV60 User Manual page 64

CV60 Vehicle Mount Computer With Windows XP/XPE User's Manual
Chapter 5 — Upgrading, Troubleshooting, and Cleaning the CV60
Rear
cover
Hard
drive
Screw
(4 places)
Bracket
3 Remove the IDE cable cover by unscrewing the two screws
that secure it.
4 Disconnect the IDE cable from the CV60.
5 Unscrew the four screws that secure the hard drive and the
hard drive bracket and disconnnect the IDE cable from the
hard drive.
6 On the new hard drive, set the jumper settings to "Master".
Refer to the CV60 Hard Drive Replacement Guide (P/N 962-
054-006A) for more information.
Screw
(10 places)
IDE
cable
53