Creating a Custom Image Restore Floppy 3 Running the Boot Floppy Disk Restore on the CV60 ..... . 4 Restoring an Image on the CV60 (Using the CD-ROM) .
Global Services and Support Warranty Information To understand the warranty for your Intermec product, visit the Intermec web site at www.intermec.com Support. The Intermec Global Sales & Service page appears.
Page 5
Telephone Support These services are available from Intermec Technologies. Service Order Intermec products Order Intermec media Order spare parts Technical Support Service Service contracts CV60 Recovery CD Instructions In the U.S.A. and Canada, call 1-800- 755-5505 and choose Description this option •...
Outside the U.S.A. and Canada, contact your local Intermec rep- resentative. To search for your local representative, from the Intermec web site, click Contact. Who Should Read These Instructions? These instructions are written for the person who is responsible for installing, configuring, and maintaining the CV60 Vehicle Mount Computer.
The CV60 Recovery Tools CD-ROM restores the partition on a CV60 Vehicle Mount Computer. The CV60 Recovery Tools CD can be shared from a server and executed on a client CV60 PC. More specifically, the CV60 Recovery Tools CD can: •...
Creating a Bootable Floppy Disk 1 Insert the CV60 Recovery CD into your CD-ROM drive. 2 Select Yes, I accept the agreement for the main menu. 3 Select Create a Bootable Floppy Disk from the menu to start the Boot Disk Builder application.
2 Check Custom to create a custom image. 3 Click Format to have Boot Disk Builder create the boot disk. Note: When building a custom image recovery floppy, you must specify a unique image name (other than the default) in the text box. CV60 Recovery CD Instructions...
5 The CV60 loads the Symantec Ghost Utility from the network location you specified in the Boot Disk Builder menu. 6 When the restore is finished, power off the CV60 and remove the USB floppy drive. 7 Power the CV60 back on. Your image should be restored.
5 When the restoration is finished, power off the CV60 and remove the USB CD-ROM. 6 Power the CV60 back on and your image should be restored. Booting If the system freezes or locks up during normal operation, you can reset the system by performing a reboot. The reboot method depends on the desired state of the CV60 PC system.
Page 12
Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com CV60 Recovery CD Instructions *962-054-073C* P/N 962-054-073C...
Need help?
Do you have a question about the CV60 and is the answer not in the manual?
Questions and answers