Intermec CV60 User Manual page 46

CV60 Vehicle Mount Computer With Windows XP/XPE User's Manual
4 Tap the active profile to expand it.
5 (Optional) Give your profile a meaningful name:
a Select Profile Label and a text box appears.
b Select the text in the box and type in a meaningful name.
6 Select one profile as the active profile by tapping Active
Profile and choosing a profile from the drop-down list.
7 Save your settings.
Configuring WPA Security With Funk Security
Use these procedures to set WPA802.1x, WPA2-802.1x, WPA-
PSK, or WPA2-PSK security on your CV60 with Funk security.
To configure WPA-802x1x or WPA2-802.1x with Funk security
1 Open Intermec Settings.
2 Make sure you have configured the communications
parameters and selected Funk as your security choice.
3 Choose Communications > 802.11 Radio > Funk Security
> Profile.
4 For Association, choose WPA or WPA2 and press Enter.
Encryption automatically defaults to TKIP if you are using
WPA. Encryption automatically defaults to AES if you are
using WPA2.
Chapter 3 — Configuring the CV60
35