Download Print this page
Intermec CV60 Installation Manual
Intermec CV60 Installation Manual

Intermec CV60 Installation Manual

Vehicle mount computer hard drive
Hide thumbs Also See for CV60:

Advertisement

Quick Links

Intermec Technologies Corporation
Worldwide Headquarters
6001 36th Ave.W.
Everett, WA 98203
U.S.A.
www.intermec.com
The information contained herein is provided solely for the purpose of allowing customers to
operate and service Intermec-manufactured equipment and is not to be released, reproduced, or
used for any other purpose without written permission of Intermec Technologies Corporation.
Information and specifications contained in this document are subject to change without prior
notice and do not represent a commitment on the part of Intermec Technologies Corporation.
© 2004 - 2008 by Intermec Technologies Corporation. All rights reserved.
The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar,
dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, i-gistics, INCA (under license),
Intellitag, Intellitag Gen2, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work, RoutePower,
Sabre, ScanPlus, ShopScan, Smart Mobile Computing, SmartSystems, TE 2000, Trakker Antares,
and Vista Powered are either trademarks or registered trademarks of Intermec Technologies
Corporation.
Wi-Fi is a registered certification mark of the Wi-Fi Alliance.
Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation
in the United States and/or other countries.
Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A.
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit
(www.openssl.org).
This product includes cryptographic software written by Eric Young (EAY@cryptsoft.com).
This product uses Regex++, Index software during its operational phases. The owner of Regex++
has granted use of the software to anyone provided such use is accompanied by the following
copyright and permission notice:
Regex++, Index. (Version 3.31, 16th Dec 2001)
Copyright © 1998-2001 Dr John Maddock
Permission to use, copy, modify, distribute and sell this software and its documentation for any
purpose is hereby granted without fee, provided that the above copyright notice appear in all
copies and that both that copyright notice and this permission notice appear in supporting
documentation. Dr John Maddock makes no representations about the suitability of this software
for any purpose. It is provided "as is" without express or implied warranty.
ii
CV60 Vehicle Mount Computer Hard Drive Installation Guide

Advertisement

loading
Need help?

Need help?

Do you have a question about the CV60 and is the answer not in the manual?

Questions and answers

Summary of Contents for Intermec CV60

  • Page 1 Intermec Technologies Corporation. Information and specifications contained in this document are subject to change without prior notice and do not represent a commitment on the part of Intermec Technologies Corporation. © 2004 - 2008 by Intermec Technologies Corporation. All rights reserved.
  • Page 2: Upgrading The Hard Drive

    Introduction To increase the file storage and software installation on your CV60, you must either upgrade the hard drive or the PC card. For a CV60 with Windows XP or XPE, upgrade the hard drive. For a CV60 with Windows CE, upgrade the PC card.
  • Page 3 Ground cables (only with rotating drives) (2) • Screws (4) To remove the existing hard drive 1 Turn off the CV60 by tapping Start > Turn Off Computer > Turn Off. 2 Detach the power cord from the CV60 to disconnect it from AC power.
  • Page 4 3 Place the hard drive on top of the bracket and install each of the four screws that secure the hard drive to the bracket. For a rotating hard drive, attach the two ground cables using two of the four screws. CV60 Vehicle Mount Computer Hard Drive Installation Guide...
  • Page 5 7 Replace the ten screws that attach the rear cover. 8 Follow procedures for attaching the Certificate of Authenticity (COA) Label. Upgrading the PC Card Use the following procedures to upgrade the PC card for a CV60 with Windows CE. There are two upgrade card kits available: •...
  • Page 6 The CV60 has a 68-pin PC card drive that can accommodate both Type I and Type II devices. To access the card drive slots on the CV60, you must remove the radome cover. Packing List To upgrade the PC card, you need a small Phillips screwdriver, and one of the Upgrade PC Card Kits listed above.
  • Page 7 Before you begin, you must decide which drive to boot from: • For a CV60 with Windows CE, boot from the PC card. • For a CV60 with Windows XP or XPE, boot from the hard drive. CV60 Vehicle Mount Computer Hard Drive Installation Guide...
  • Page 8 To set the boot device priority 1 Plug the keyboard into the CV60. 2 Connect a power cord to the CV60 and connect the cord to AC power. The CV60 automatically boots. 3 While the CV60 boots, press F2. The PhoenixBIOS Setup Utility screen appears.
  • Page 9 9 On the Set Up Confirmation dialog box, select Yes to save the changes you just made. Note: When you start the CV60 for the first time, it will take several minutes to boot up. CV60 Vehicle Mount Computer Hard Drive Installation Guide...
  • Page 11 Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2008 Intermec Technologies Corporation. All rights reserved. CV60 Vehicle Mount Computer Hard Drive Installation Guide *932-013-001* P/N 932-013-001...