Installing Applications Using Wavelink Avalanche; Installing Applications Using An External Usb Device; Mapping To A Network Drive - Intermec CV60 User Manual

Chapter 4 — Developing and Installing Applications

Installing Applications Using Wavelink Avalanche

Installing Applications Using an External USB Device

Mapping to a Network Drive

48 CV60 Vehicle Mount Computer With Windows XP/XPE User's Manual
You can use the Wavelink Avalanche device management system
to install applications on all of your wireless CV60s. The CV60
ships with the Avalanche Enabler already loaded on it.
Each time the Avalanche Enabler is activated (typically on a
reset), the CV60 attempts to connect to the Avalanche Agent.
When the CV60 connects to the agent, the agent determines
whether an update is available and immediately starts the
software upgrade, file transfer, or configuration update.
To use Avalanche to remotely manage the CV60
1 Install software packages and updates for the CV60 using the
Avalanche Administrative Console.
2 Schedule the CV60 updates or manually initiate an update
using the Avalanche Administrative Console.
For more information on using Wavelink Avalanche, contact
your local Intermec representative or visit the Wavelink web site
at www.wavelink.com.
You can use an external USB device such as an external hard drive
to install applications on the CV60.
To install an application using an external USB device
1 Connect a USB device to one of the USB ports on the CV60.
A pop-up screen appears.
2 Click on Open to view files using Windows Explorer. The
contents of the USB device are shown.
3 Browse to the application you want to install on the CV60,
and double-tap the executable file to start the installation.
4 Follow the on-screen instructions to install your application.
You can transfer files between your desktop PC and the CV60 by
mapping to a network drive. You may need to contact your IT
department to map to certain drives.