Dual Tone Multi-Frequency (Dtmf); Manual Dialing - Kenwood TM-V71A Instruction Manual

DUAL TONE MULTI-FREQUENCY (DTMF)

The keys on the microphone keypad function as DTMF keys; the 12 keys found
on a push-button telephone plus 4 additional keys (A, B, C, D). This transceiver
provides 10 dedicated memory channels. You can store a DTMF code with up to
16 digits.
Some repeaters in the U.S.A. and Canada offer a service called Autopatch. You
can access the public telephone network via such a repeater by sending DTMF
tones. For further information, consult your local repeater reference.

MANUAL DIALINg

Manual Dialing requires only two steps to send DTMF tones.
1 Press and hold the microphone [PTT].
2 Press the keys in sequence on the keypad to send DTMF tones.
• The corresponding DTMF tones are transmitted.
• If the DTMF Hold function is activated, you need not hold down [PTT] while pressing
keys. After transmitting the first tone (by pressing [PTT] and the first key), pressing
additional keys will keep the transceiver in transmit mode for 2 seconds.
Frequency (Hz)
697
770
852
941
n DTMF Hold
Activate this function to remain in transmit mode, after beginning to press keys
when making a call.
1 Enter Menu mode and access Menu 300 (DT.HOLD) {page 20}.
2 Set DTMF Hold to ON to continue transmitting when pressing keys.
• Set this menu to OFF to stop the 2 second continuous transmission.
1209 1336
[1] [2]
[4] [5]
[7] [8]
[ ] [0]
1447 1633
[3] [A]
[6] [B]
[9] [C]
[#] [D]
55